Illustration of a rack of filter pipette tips next to a micropipette

Choosing Filter Pipette Tips for PCR Work: A Practical Guide

Every PCR run starts at the pipette. A single aerosol droplet carried from one sample into the next can bring along enough template to give a false positive, and by the time the thermal cycler finishes, the damage is already done. Filter tips are the cheapest insurance against that problem. This guide explains how to pick the right size and type for a clinical or research PCR workflow.

Why filter tips matter for PCR

PCR amplifies a few starting copies into millions, so even a trace of carryover matters. A filter inside the tip acts as a barrier between the liquid and the pipette shaft, which keeps aerosols and splashes out of the pipette body. That protects both your samples and the pipette itself. If your lab runs diagnostic or sensitive assays, filter tips are the standard choice for every step that touches template, primers or master mix.

Match the tip to the volume

Pick the tip whose maximum volume is closest to the volume you are pipetting. A 2µl transfer is best handled with a 10µl tip, a 15µl transfer with a 20µl tip, and a 150µl transfer with a 200µl tip. Using a 1000µl tip for a small volume reduces accuracy. Most PCR benches need a core set of 10µl, 20µl, 200µl and 1000µl tips, plus 50µl, 100µl or 300µl sizes if your protocols use them.

Standard or low retention?

Low retention tips have a surface that lets liquid slide out instead of clinging to the wall. They are a good fit for viscous reagents such as master mixes and enzyme solutions, and for small volumes of precious samples, where a little liquid left behind can change the result. Standard polypropylene tips work well for routine transfers of watery solutions.

When to choose extended-length tips

Extended-length tips reach the bottom of narrow tubes and deep-well plates without the pipette body touching the tube. They are handy when you add template to 0.2ml tubes or load strips on a crowded bench.

Rack packs or bulk packs

Rack packs arrive ready to load into the pipetting station, so they save time and are quick to restock. Bulk packs suit labs that prefer to fill their own racks. Both formats are available in our catalog.

Good habits for a clean PCR bench

  • Use a fresh tip for every sample and every reagent. Never reuse a tip, even for the same tube.
  • Keep pre-PCR and post-PCR work in separate areas with dedicated pipettes.
  • Open tubes and plates only when you need them, and seal plates before they leave the bench.
  • Keep a spare rack of each size on hand so you never reach for the wrong tip in the middle of a run.

PCR consumables available at Laboes.com

These are the filter tips and PCR consumables we stock. Prices are listed per case or pack, as shown.

Product and pack sizeSKUPrice
10µl PP filter tips, 96/rack, 10 racks/pack, 5 packs/case23-0010S$222.09
10µl extended long, low retention filter tips, 96/rack, 10 racks/pack, 5 packs/case23-0011S$240.89
20µl low retention filter tips, 96/rack, 10 racks/pack, 5 packs/case23-0021S$250.99
50µl low retention filter tips, 96/rack, 10 racks/pack, 5 packs/case23-0051S$250.99
100µl low retention filter tips, 96/rack, 10 racks/pack, 5 packs/case23-0101S$250.99
200µl filter tips, 96/rack, 50 racks/case23-0200A1$189.29
300µl low retention filter tips, 96/rack, 10 racks/pack, 5 packs/case23-0201S$236.79
1000µl filter tips, 96/rack, 6 racks/pack, 10 packs/case23-1000$235.49
96-well PCR plates, 0.2ml, non-skirted, clear, 100 plates/case60-0016$160.19
8-strip PCR tubes with flat-top strip caps, 0.2ml, 10 packs/case60-0088$221.29
Sealing film, 50.8µm, 100/case61-0010$92.39

Need a larger quantity or a size not shown here? Ask for a quote at Laboes.com and our team will help you match the right tips and PCR consumables to your workflow.

Frequently Asked Questions

Do I need filter tips for every PCR step?

Use filter tips for steps that handle template DNA, master mix with template, or amplified product. Standard tips are fine for non-sensitive tasks such as buffer preparation.

What do filter tips actually prevent?

They block aerosols and liquid from reaching the pipette shaft, which protects your samples from cross-contamination and protects the pipette itself.

Are filter tips worth the extra cost?

For sensitive assays like PCR and qPCR, yes. One contaminated run usually costs more in reagents and time than the difference in tip price.

Leave a Reply

Shopping cart

0
image/svg+xml

No products in the cart.

Continue Shopping