Black and white syringe with a sterile syringe filter

Syringe Filter Guide: 0.22 µm vs 0.45 µm and PES vs PVDF vs PTFE

A syringe filter looks simple, but the wrong pore size or membrane can ruin a sample, clog fast, or leave contamination behind. This guide covers the two decisions that matter most: pore size and membrane material.

0.22 µm vs 0.45 µm: which pore size?

0.22 µm is the standard for sterile filtration. It removes bacteria, so use it for cell culture media, buffers, and anything that must go into a sterile workflow. 0.45 µm is for clarification. It clears particles and debris from samples before analysis, and it flows faster and clogs less. Neither one removes viruses or mycoplasma reliably.

PES, PVDF, PTFE or nylon?

MembraneBest forWatch out for
PESCell culture media, buffers, protein solutions (low protein binding, fast flow)Not for strong organic solvents
PVDFAqueous samples and protein work, general lab filtrationCheck compatibility with your solvent
PTFEAggressive solvents, acids, bases, and gas or air ventingHydrophobic types must be pre-wet for water-based samples
NylonHPLC sample prep with aqueous and organic mixesBinds proteins

Choosing the diameter

Match the filter size to your volume. A 13 mm filter suits small samples, roughly under 10 mL. A 25 to 33 mm filter handles larger volumes, up to about 100 mL, before it clogs. Over-pushing a small filter risks a burst seal and a lost sample.

Quick tips for better filtration

  • Pre-filter cloudy samples through a larger pore size first.
  • Push slowly and steadily. Too much pressure can rupture the membrane.
  • Use one filter per sample to avoid cross-contamination.
  • Discard the first few drops when you need the cleanest filtrate.

Syringe filters in stock at Laboes.com

These sterile syringe filters ship from Lexington, KY. See the full range in our lab consumables category.

FilterPackPrice
PES, 0.22 µm, 13 mm100/pack, 8 packs/case$243.09
PES, 0.22 µm, 25 mm100/pack, 4 packs/case$156.09
PES, 0.22 µm, 30 mm100/pack, 4 packs/case$185.59
PES, 0.22 µm, 33 mm100/pack, 4 packs/case$225.19
PES, 0.45 µm, 33 mm100/pack, 4 packs/case$225.19
PVDF, 0.45 µm, 30 mm100/pack, 4 packs/case$226.67

Need a 96-sample workflow? We also carry 96-well hydrophilic PTFE filter plates. Ask for a quote on case quantities or standing orders at Laboes.com. Orders over $1,000 ship free.

Frequently Asked Questions

Should I use a 0.22 µm or 0.45 µm syringe filter?

Use 0.22 µm when you need sterile filtration, such as for cell culture media or buffers. Use 0.45 µm to clear particles and debris before analysis.

Which membrane is best for protein solutions?

PES and PVDF have low protein binding, which helps protect yield. Nylon binds proteins and is better suited to HPLC sample prep.

How do I stop a syringe filter from clogging?

Pre-filter cloudy samples through a larger pore size, choose a larger filter diameter for larger volumes, and push slowly and steadily.

Leave a Reply

Shopping cart

0
image/svg+xml

No products in the cart.

Continue Shopping